Ways to Troubleshoot a Ford Automatic Transmission 1Park your Ford car on a level surface. Start out your Ford and permit it to idle for two to 3 minutes.2Open the hood of your Ford and pull on the looped manage that sits behind the engine. The manage ends at a lengthy neck that stretches down for the transmission.
This is the transmission dipstick.3Remove the dipstick absolutely, wipe it off then reinsert it all the way into the filler neck till it bottoms out. Then eliminate it once more. Note the color. It must be reddish. If it's not, the transmission fluid might be burned. Confirm this by smelling the fluid. If it smells burned, it truly is automotive diagnostic tools. You'll want to alter your transmission fluid immediately to stop further harm for your transmission. The fluid level should also be among the upper and decrease fill marks on the finish in the dipstick diagnostics car tool. If it really is low, you need to fill the transmission with Ford-approved automatic transmission fluid.
4Check for issues staying in gear when driving. When the vehicle slips out of gear while driving, this indicates a problem with all the transmission. You may also hear grinding or crunching noises. This indicates that your transmission is seriously damaged and wants an overhaul.5Check for transmission issues using an on-board diagnostic scan tool. This tool can be plugged in to the OBD access port located to the left in the fuse panel below the dash inside the driver's side footwell. Press "Start" on the scan tool or wait for the tool to automatically retrieve the error codes. You can then have these codes translated employing your Ford's service manual or by most auto parts stores.
Related articles:
No comments:
Post a Comment